Water analysis
Water measured, not guessed
No test strips, no colours to interpret. At every visit I measure your pool water with a photometer, record the values in a digital tool and give you a clear report: what is fine, what is drifting, what I corrected.
- Free and combined chlorine, pH, alkalinity, hardness, stabiliser, salt, phosphates
- Every value compared with its target range: in range, keep an eye, or out of range
- A report after every visit, invaluable when you live far away
Your turn to play
This is a recreation of the screen I use at every visit. Drag the black markers (or tap the bars): each parameter's status, the state of the water and my recommendations update live.
Water to correct
parameters in range
- 0in range
- 0to watch
- 0out of range
Drag the black markers to change a value
Demo values. The ranges shown are common benchmarks for a private pool: I adapt them to your pool (lining, salt or chlorine treatment, use, exposure) at the first diagnosis.
From the poolside to the report
Three steps at every visit, whether you are on site or hundreds of kilometres away.
I measure on site
I take a sample at the pool and run it through the photometer: a numerical reading, not a shade to guess. Chlorine, pH, alkalinity, hardness, stabiliser, salt, phosphates: the parameters that decide water quality.
The tool makes the diagnosis
The values go into my digital tool. Each one is compared with its target range: in range, keep an eye, or out of range, with the exact gap.
I correct and report back
I adjust what needs adjusting, then you receive a report: the values, how they changed, the actions taken. You know where your pool stands, even from a distance.
An analysis at every stage of the year
Opening
The water is coming out of winter: I measure before treating, so I correct what needs correcting and nothing more.
Opening →Winterising
The values taken before closing are the basis of the winter treatment, and keep a record of the water's condition.
Winterising →Maintenance
Visit after visit, tracking the values lets me spot a drift before the water turns.
Maintenance →Questions about the analysis
Why a photometer rather than test strips?
A strip is read by eye, and two people never see quite the same shade. A photometer measures the light absorbed by a water sample treated with a reagent and displays a numerical value. That is what makes it possible to compare one visit with the next and spot a drift.
What do “In range”, “Keep an eye” and “Out of range” mean?
In range: the value is within the target range. Keep an eye: it is slightly off; nothing urgent, but I track it closely. Out of range: it is clearly outside the range and calls for a correction.
Do the simulator's ranges apply to my pool?
They are common benchmarks for a private pool. I refine them for your pool at the first diagnosis: lining, disinfection method (chlorine, salt), use and exposure all change the target.
Do I need to be there for the analysis?
No. The measurement is taken at the pool, with access agreed in advance (open gate, key or code). The report then tells you where your water stands.
Have my water analysed
By phone or through the form, whichever suits you. Quotes are free and sent by email.
Service area
Dordogne Valley · Northern Lot (46)